Tools that are more useful than you could imagine.
I like tools, especially good-looking tools. Often I buy a tool solely based on looks. I know that’s a really bad criteria, but what can I say? I’m a sucker for a pretty tool! Some of the “cool” tools I buy never see the light of day, others I find moderately useful, and a rare few surprise the heck out of me as either being extremely useful or really well suited for a specific task. The latter is the category of tools I will share with you in this column. To start off, here are three of my favorite tools I didn’t think I needed:
Bosch Pocket Driver
1. Bosch Pocket Driver, #PS20-2A, $130. When I first saw the Bosch Pocket Driver, I wondered why I would ever need such a tool. I’ve owned dedicated cordless screwdrivers and never found them useful, and my current array of cordless drill/drivers was performing well for my screw driving needs. Even with all of my trepidation, I decided to get a Pocket Driver anyway. Lo and behold, I found myself amazed by how useful this tool is. It’s small, lightweight, has plenty of power, the battery charge lasts a long time, and the clutch works well. It lives up to its name since it’s easily carried in an apron pocket. I use it to drive virtually every screw I install in my shop. It will easily drive 3? long #8 screws, but it’s not a speed demon. If you need to drive a lot of long screws fast, you’ll need to revert to a faster driver. This is not a problem, since most screws used in cabinet and furniture making are 1-1/4? or shorter. (Bosch)
Starrett 6
2. Starrett 6? x 3/4? Steel Rule With End Graduations, #C304SRE-6, $19. I’m fairly certain that no day has passed in my career where I didn’t carry a 6? steel rule in my apron pocket. I use it to make measurements up to 6?, using the rule’s long edges and I use it to set router bit and table saw blade heights up to 3/4? using the rule’s graduated ends. This tool is like one of my extremities–if it’s missing, I can’t function. The Starrett brand rule I use is a quality tool made from 1/50? thick tempered, semi-flexible steel with a satin chrome finish. The graduations on the long edges are in 8ths, 16ths, 32nds, and 64ths. The end graduations are in 32nds on both ends. The graduation marks are precisely etched and the satin finish makes them easy to read. Even the 1/64? markings are clear as day. Starrett also marks the two finer graduated edges with a system they call “Quick-Reading 32nds and 64ths.” These markings greatly speed up calculating the finer measurements. (Starrett Tools)
3. Lie-Nielsen Adjustable Mouth Low Angle Block Plane, #60-1/2, $165. I’ll admit it, this is not a tool I use often, but it sure is a darn nice looking, wonderful to hold, and beautifully crafted tool. Those qualities in themselves are enough to sell me. When the need arises and it comes time to remove a “shaving” of wood, no other hand plane or tool I’ve used even comes close to the caliber of this tool. Glide it across the edge of a softer wood and a sliver of wood peels up the tool’s throat. Wow… that’s nice! Notice I said “softer wood.” The point here is that cutting tools, like planes and chisels, work much easier on softwoods and softer hardwoods like mahogany, cherry, and walnut. Hand planning hardwoods like hard maple, requires a lot more labor and the results, though effective, are not nearly as satisfying. (Lie-Nielsen Toolworks)
Photos By Author
Share tips, start a discussion or ask one of our experts or other students a question.
9 Responses to “3 Tools You Didn’t Know You Needed”
Tony Duke
These three tools are very essential and we need to know about these tools and we can easily know about these tools by reading this post. Thanks for the share.
stuart
I love my 60 1/2 and use it all the time. It is a go to tool for clean up, fine tuning etc. And boy does it feel good when i use it!
Daryl
I've used several of the 6" stick rulers in past as a machinist. And yes Starret is considered the go to standard, I've used the "Fowler 6” 4R Rigid Steel Rule. Because been buying one new would only set me back $10-12. Whereas the Starrett would be in the $25-30 range (NEW)
Hence the common nickname for them was Stare'at'em because I don't have the money for them. Even today I still have a Fowler 4" that's close to 30 years old and its just as good now as when I got it back 1993
Mike
If you rarely use the block plane, why is it on this list.... seems you could have come up with something else that is indispensable....just sayin
DC Chambers
I have the Bosch pocket driver and the drill. Why do the other brands have such massive batteries? These last quite well, and do everything I need. Awesome tools!!
Nate Frost
I work in a one-man millwork shop, and I have all three of these (except my planes are all Stanley Sweethearts), and I use them often. Yes, a good block plane is faster than sanding, easier to control, and leaves a much better surface for joinery. The Bosch driver was purchased with a slightly larger Bosch impact driver, which I actually use with a Vix bit, then I screw on hardware with the driver. The Starret 6 inch rule is paired with a Starret metric rule of similar size, which is handy for interpreting Euro hardware installations.
The Stanley planes may not be quite as pretty, but with a little tuning and careful sharpening and care, they can perform nearly as well, and for a lot less money.
Hardly a week goes by when I don't use all of these - they are worth the investment.
Gilles
I bought a pocket driver. The battery was not good.
ray wiese
youre an idiot that bosch pocket drill is my go to tool Im an electrician and it works better thha some heavy drill
Jason
These eBoot rulers seem to be the same, but at $5.99 on Amazon. Hope this helps! Manufacturer Part #EBOOT-RULERS-04
Become A Member
Premium Membership
Unlock exclusive member content from our industry experts.
24/7 Access to Premium Woodworking Videos, Projects, and Tips
Step-by-Step Instructional Demos, Plans, and Tutorials
50% Off Video Downloads Purchased in the Woodworkers Guild of America Shop
Get exclusive premium content! Sign up for a membership now!
This site uses cookies and other technologies to track your use of the site that will allow us and our service providers and partners to enhance your experience and deliver relevant content to you. By agreeing to or closing this notice, you understand and agree to such use and data collection. For more information about our privacy practices and your choices, please visit our privacy policy and cookie notice.
These three tools are very essential and we need to know about these tools and we can easily know about these tools by reading this post. Thanks for the share.
I love my 60 1/2 and use it all the time. It is a go to tool for clean up, fine tuning etc. And boy does it feel good when i use it!
I've used several of the 6" stick rulers in past as a machinist. And yes Starret is considered the go to standard, I've used the "Fowler 6” 4R Rigid Steel Rule. Because been buying one new would only set me back $10-12. Whereas the Starrett would be in the $25-30 range (NEW) Hence the common nickname for them was Stare'at'em because I don't have the money for them. Even today I still have a Fowler 4" that's close to 30 years old and its just as good now as when I got it back 1993
If you rarely use the block plane, why is it on this list.... seems you could have come up with something else that is indispensable....just sayin
I have the Bosch pocket driver and the drill. Why do the other brands have such massive batteries? These last quite well, and do everything I need. Awesome tools!!
I work in a one-man millwork shop, and I have all three of these (except my planes are all Stanley Sweethearts), and I use them often. Yes, a good block plane is faster than sanding, easier to control, and leaves a much better surface for joinery. The Bosch driver was purchased with a slightly larger Bosch impact driver, which I actually use with a Vix bit, then I screw on hardware with the driver. The Starret 6 inch rule is paired with a Starret metric rule of similar size, which is handy for interpreting Euro hardware installations. The Stanley planes may not be quite as pretty, but with a little tuning and careful sharpening and care, they can perform nearly as well, and for a lot less money. Hardly a week goes by when I don't use all of these - they are worth the investment.
I bought a pocket driver. The battery was not good.
youre an idiot that bosch pocket drill is my go to tool Im an electrician and it works better thha some heavy drill
These eBoot rulers seem to be the same, but at $5.99 on Amazon. Hope this helps! Manufacturer Part #EBOOT-RULERS-04